(203) 458-0709 gavel@thomasauction.com

AuctionDetails

Wednesday, September 18, 2019, 1:00 PM (ET)

Norfil Manufacturing

Online Auction
By Order of Norfil Manufacturing, Complete Plant Closure, Including: CNC Machining Centers, CNC Turning Centers, Machine Tools, Grinding & Finishing Equipment, Inspection Tooling, Material Handling, Plant Support, etc.
Pacific, Washington - USA
View Lot Catalog Register for this Auction Auction Brochure Photo Gallery
FEATURING:
(10) CNC VERTICAL MACHINING CENTERS
  • 2015 DMG MORI DMF 260-11 5-Axis CNC Vertical Machining Center, Siemens 840D SL 3D CNC Control, Travels: X- 102.4"; Y 43.3",Z 35.4”, With B-Axis Swivel Head (10,000 RPM, 59 HP), 126” x 43.3” Fixed Table, 43.3” Dia. Built-In B-Axis Rotary Table, 60-Station Automatic Tool Changer, HSK-A100 Spindle Taper, 12-Position Lower Turret, Through Spindle Coolant, Paper Coolant Filtration System, Chip Conveyor, Nikken 4th Axis Rotary Table, S/N 15185265654. New 2015
  • Kasuga Quantum Q-125O CNC Vertical Machining Center, Fanuc 18M CNC Control, Travels: X-50” Y-24”, Z-26”, 25 HP, 30-Position ATC, 50 Taper Spindle, 6000 RPM, SN 706011
  • OKK MCV-560DS CNC Twin Spindle Vertical Machining Center, 50” x 22” Table, Twin 30-Position ATCs, CAT 50 Taper, Chip Conveyor, OKK Neomatic CNC Control, SN 222
  • Haas VF-4 CNC Vertical Machining Center, Haas CNC Control, Programmable Coolant, 20 HP, 710 IPM, Brushless Servos, S/N 16729, with Haas 4th-Axis Rotary Table & Tailstock
  • Matsuura MC-1500V-DC CNC Twin Spindle Vertical Machining Center, Travels: X-60”, Y-30.7”, Z-29.5”, 2 x 30 ATC, Fanuc 11M CNC Control, S/N 890207904
  • Matsuura MC-1500V-DC CNC Twin Spindle Vertical Machining Center, Travels: X-60”, Y-30.7”, Z-29.5”, 2 x 30 ATC, Fanuc 11M CNC Control, S/N 86015268
  • Matsuura MC-1000V-DC CNC Twin Spindle Vertical Machining Center, Travels: X-41”, Y-20”, Z-22”, 2 x 30 ATC, BT-50 Taper, Fanuc 11M Control, S/N 86085678
  • Matsuura MC-1000V-DC CNC Twin Spindle Vertical Machining Center, Travels: X-41”, Y-20”, Z-22”, 2 x 30 ATC, BT-50 Taper, Fanuc 11M Controls, S/N N/A
  • Matsuura MC-1000V-DC CNC Twin Spindle Vertical Machining Center, Travels: X-41”, Y-20”, Z-22”, 2 x 30 ATC, BT-50 Taper, Fanuc 6M Control, S/N 8406080
  • Matsuura Twin-Master 2 MC-1000V-DC CNC Twin Spindle Vertical Machining Center, 2 x 30 ATC, BT-50 Taper, Fanuc 6M CNC Control, 1981, S/N 81031815
 (4) CNC VERTICAL AEROSPACE PROFILERS
  • SNK FSP-120V 5-Axis CNC Vertical Profiler, Travels: X-120”, Y-50”, Z-24”, 2-Axis Swivel Head, A=50 Degrees, B=50 Degrees, 4000 RPM, Fanuc 11M CNC Control, S/N 451018
  • H & H Wilson 6-Spindle CNC Vertical Aerospace Profiler, GE Fanuc 15M CNC Control, Approximate Travels: X-144”, Y-48”, Z-24”, With 194” x 118” Table, 10 HP Motors, 40” Between Spindles, Chip Conveyor (Remanufactured by H & H Wilson)
  • H & H Wilson 6-Spindle CNC Vertical Aerospace Profiler, GN Fanuc 11 CNC Control, 168” x 78” Overall Table Size, 148” x 78” Working Surface, Travels: X-144”, Y-48”, Z-24”, ” Table, Approximate Travels: X-160”, Y-42”, Z-24” (Remanufactured By H & H Wilson)
  • H &H Wilson FWC1310 4-Spindle CNC Aerospace Profiler, Mitsubishi CNC Pendant Control, 120” x 34” Table
 (5) CNC HORIZONTAL MACHINING CENTERS
  • Okuma MC-600H CNC Horizontal Machining Center, OSP-7000 Controls, Travels: X-39.25”, Y-31.5”, Z-29.5”,  (2) 25” x 25” Pallets,  30-5000 RPM, 30 HP, 40-Position ATC, 50 Taper, Rigid Tapping, Renishaw Probe, Automatic Tool Preset, Thru Spindle Coolant, Extended Memory, S/N 0340
  • Okuma MC-500H CNC Horizontal Machining Center, OSP-5020M CNC Controls, Travels: X-28”, Y-24.8”, Z-24.8”, Pallet Size: 19.7” x 19.7”, Pallet Index: 360,000 Degrees, 80 ATC, CAT 50 Taper, 5000 Max. RPM, Renishaw Probe, Through Spindle Coolant, Chip Conveyor, S/N 62050396
  • Okuma MC-500H CNC Horizontal Machining Center, OSP-5020M CNC Controls, Travels: X-28”, Y-24.8”, Z-24.8”, (2) 19.7” x 19.7” Pallets, 360,000 Degree, 80 ATC, CAT 50 Taper, 5000 Max. RPM, Renishaw Probe, Through Spindle Coolant, Chip Conveyor
  • Hitachi Seiki HG-500-II CNC Horizontal Machining Center, Travels: X-37.4”, Y-32.3”, Z-30”, with (2) 19.7” x 19.7” Pallets, Seicos 10M CNC Control, 40 ATC, CAT 50 Taper, 7000 Max. RPM, Thru-Spindle Coolant, S/N HG52182
  • LeBlond Makino MC-1210 CNC Horizontal Machining Center, Travels: X-49”, Y-36”, Z-24”, 4000 RPM, 2APC Pallet Changer with 36” Pallet Size
  • Okuma MC-50H CNC Horizontal Machining Center, 19.7” x 19.7” Pallets, 60 ATC, OSP-5020M CNC Control, S/N 6205.0396
CNC TURNING CENTERS
  • Romi M20 CNC Turning Center, Fanuc 21T CNC Control, 20” Swing, 60” Center Distance, 10” Chuck, 8-Position Turret, Tailstock, Chip Conveyor, 0S/N 002-088903-404, New 2004
  • Okuma Crown 769 CNC Turning Center, OSP-U100L CNC Control, Approx. 40” Centers, 12-Position Turret, Chip Conveyor, S/N 0046
  • Okuma LH35-N CNC Turning Center, OSP-5000LG CNC Control, 28” Swing, 60” Center Distance, 35 HP, 28.00” Swing, Tailstock, S/N 6102-2053
  • Okuma LH35-N CNC Turning Center, OSP-3000 CNC Control, 28” Swing, 60” Center Distance, 15” Chuck, 35 HP, 28.00” Swing, Tailstock, Chip Conveyor, S/N 5702-1787
TOOLROOM EQUIPMENT
  • Arsenal JSCo FU321M Universal Knee Mill, 52” x 12” Table, 45 Deg. Table Swivel, 2000 RPM, 10 HP, S/N 2900, New 2006
  • Bridgeport Mill, With Power Feed, Digital Readouts, S/N 191442
  • Graziano Model SAG-180 Engine Lathe, 8” Chuck, 55” Centers, Tool Post
  • Sunnen MBB-1660 Horizontal Hone, S/N 44942
  • Everett Model 3450-RPM Chop Saw (Approx 2009)
GRINDING DEPARTMENT
  • 2015 Acra ATC-40M Tool & Cutter Grinder, S/N 22738
  • Makino C40 Tool & Cutter Grinder, S/N D42-2531
  • K.O. Lee Tool & Cutter Grinder
  • Hartex Tool & Cutter Grinder, S/N 5-136
SAWS
  • Grob 4V-24 Vertical Band Saw, 24” Throat, SN 1471
  • Do All Horizontal Bandsaw With Infeed And Roll Case
INSPECTION
  • Mitutoyo Bright BRT 916 Coordinate Measuring Machine, 92” x 46” Table, Travels: X-36”, Y-63”, Z-23”, S/N 0024705
  • 14” Mitutoyo PH-3500 Optical Comparator, DRO, S/N 9505010
  • Mitutoyo QM-Height 600 Electronic Height Gage
  • 70” x 36” Granite Table
  • Rockwell Hardness Tester
  • Misc. Calipers, Micrometers, Gage Sets, Etc.
AIR COMPRESSORS-AIR DRYERS
  • Sullair 16BS-6OL Air Compressor
  • Ingersoll Rand Model 5510NAJ00 Air Compressor
  • Ingersoll Rand Model R11I Rotary Screw Air Compressor
FORK LIFTS/MATERIAL HANDLING
  • Nissan 4400 Lb. LP Fork Lift, Model MCP1F2A25LV
  • Hyster H50XM, LPG Side Shift, Cushion Tires
  • Skyjack SJ 6832 Scissor Lift
  • TCM FG25N6 5,000 Lb Forklift LPG, Cushion Tires
TOOLING AND PLANT SUPPORT
  • Tremendous Quantity of Tool Holders, Kurt Vises, Tombstones, Perishable Tooling, Rotary Tables, Hand Tools, Arbor Presses, Pneumatic Die Grinders, Grinding Stones, Tool Carts, Assorted Machine Square Parts, Spindles, Bearings, Electronic Parts, Servo Motors, Spare Parts, Shelving, Racking, Etc.
  • (11) 1000 Lb. Capacity Free-Standing Jib Cranes
  • Raw Steel, Including Aluminum, Stainless, Inconel, Etc.
  • Numerous Vestil Self-Dumping Hoppers, Models D-75HD, H100-MH, H-200MD
  • Everett 10” Chop Saw
  • Coolant Wizard Self-Contained Coolant Recondition System
  • Miller Millermatic 185 Welder On Cart
  • 4’ X 4’ Digital Platform Scale
  • Landa Parts Washer
  • Transformers
  • Golf Cart
  • Security System
  • Offices
VEHICLES
  • 2010 Mitsubishi FUSO FE145 Flat Bed Truck, 14,500 Lb. Capacity, VIN #JL6BBD1S7AK008281
MUCH MORE!! TOO MUCH TO LIST!!
EQUIPMENT LOCATION:
Norfil Manufacturing
1335 Valentine Ave SE
Pacific, WA 98047
AUCTION TYPE
Online Auction - Internet Bidding Only
Bidding Status: Bidding Open!!! Click Here to View Lot Catalog and Submit Bids Now!!!
AUCTION DATES
First Lot Closes: Wednesday, September 18, 1:00 PM (ET).

Lots have 45-second staggered closing times with 1-lot closing every minute.
INSPECTION
Open House Inspection: Tuesday, September 17,  9 AM to 4 PM (local time)
SHIPPING - RIGGING
Buyers are fully responsible for all rigging and shipping costs. We strongly recommend all buyers to get rigging quotes prior to bidding and bid accordingly.

For Rigging Quotes Contact:

Ness Campbell Crane & Rigging
Steve Powell
Phone: 253.318.8437
s.powell@nesscampbell.com

All Enterprises
Jason Aldinger
Phone: 855-587-7700
TERMS & CONDITIONS

Registration Deposit / Bidder Approval.  All bidders that aren't pre-approved by Thomas Industries will be required to provide a refundable deposit, prior to being approved for bidding.  The deposit must be  25% of the amount the bidder is looking to be approved for bidding up to.  Thomas Industries, at their sole discretion, reserves the right to deny bidding privileges to any customer. For information on bidder Approval or to provide a registration deposit contact Irina Lekhmus (email: irina@thomasauction.com or Phone: 203-458-0709). 

Currency:  (USD).  This auction will be conducted in United States currency (USD)

Buyer's Premium: 15%

Staggered Closing Times: Lots Have 45-Second Staggered Closing Times.

Auto Extend Bidding: If a bid is submitted with less than 3-minutes remaining, the closing time for that lot will be extended by 3-minutes.

Payment Due In Full: Thursday, September 19, 2019

Payment Types: Certified Check or Wire Transfer

As-Is Where-Is:  All Items Are Sold "As-Is Where-Is" With No Warranty or Guarantee of Operating Condition.  Auctioneer Strongly Recommends That Buyers Inspect Equipment Prior to Bidding.

Removal:  Removal begins Thursday, September 19, 2019. Removal Hours: 7 AM to 5 PM (M-F). All items must be removed by Friday, October 11, 2019.  Any items not removed by this date will be considered abandoned and bidder will forfeit all right to any items not removed, including all deposit or  payment monies.

Removal Costs: Buyers are fully responsible for all cost to remove their purchases.  Please get removal quotes prior to bidding and bid accordingly.

Legally Binding Contract:  All bids constitute a legally binding contract and bidders will be legally obligated to make payment and remove items in accordance with the terms and conditions of the sale.
View Complete Terms & Conditions